Storage and returns guidelines
Please refer to the detailed information in the following documents:
- Products without any electronics
- E-mobility products with Lithium Ion batteries
- Power wheelchairs and scooters with gel batteries
Before returning an item to us, please ensure you have read the information below.
When returning an item, please follow the returns process underneath and ensure you label whether the item has been disinfected or not. Failure to do so may mean that your return takes longer to process or is rejected. Should you have any queries on any of the below, please contact us at returns@sunmed.co.uk
Please note that this returns process is for our approved customers (either mobility dealerships or the NHS). If you are an end user and you would like to return an item, please contact the dealership or wheelchair service that provided you with the item.
Please review the disinfection process carefully for all returns related to end products (chairs/ scooters/ Jay seating).
Returns Policy
1) Warranty Claims
Please note that warranty is for parts only. The warranty details will be enforced as specified in the user manual of the product concerned.
If you wish to make a warranty claim, please let us know the part number that you require and the serial number/ order number of the product in question via our Returns form. We will endeavour to send you a replacement part free of charge and we will send you a collection date for the faulty part.
2) Damage through delivery
Should you receive a delivery from Sunrise Medical that is damaged, you must refuse the delivery.
Transit damaged items will only be accepted if we have been notified within 24 hours of the delivery and you have marked your delivery note from the carrier as “damaged”. The parts must be returned immediately as per the Returns process below.
3) Ordering errors/No longer required
If you wish to return an item because you no longer need the item, or if you have made a mistake on the order, then you must notify us within 5 days of receiving the order and the item must be returned within 30 days. If there is not a fault with the product, then any claims made after 30 days will be rejected.
Re-stocking fees
- If a part has been incorrectly ordered or is no longer needed then a restock fee of 20% is applied
- For any configured products this is 45%
Disinfection Requirements
The new Medical Device Regulations that come into force on May 25th 2020 and with new Requirements for ISO13485 (revision 2016) becoming obligatory on February 28th 2019, means that there is an enhanced focus on disinfection standards.
Due to current ISO standards we are obliged to ensure that all chairs/ scooters/ cushions have been decontaminated before being handled by our staff. Some products may be classed as ‘high risk’. Please see examples of high risk products below:
- Products that have been in close contact to a break in the client’s skin or mucous membranes.
- Products contaminated with particularly virulent or readily transmissible organisms.
- Products used by an immunocompromised client.
If a product requires disinfection at Sunrise Medical, then this may increase the lead time for the repair.
If a product is high risk, then the Returns team will arrange for a red bag to be sent to you. Please place the red bag on the product in question before collection is arranged. Please refer to www.sunrisemedical.co.uk/resources/returns for advice on the disinfection of medical devices. Thank you for your co-operation.
Hygiene measures before products can be returned to Sunrise Medical:
- All surfaces which come into contact with the user must be treated with a disinfection spray. To do this, you must use a suitable disinfectant for rapid alcohol-based disinfection of medical products and medical devices. There should be a minimum exposure time of 15 minutes before the product can be considered disinfected.
- Always take into account the manufacturer’s instructions for the disinfectant before use.
- The joystick control on power wheelchairs can be wiped with a damp cloth with a dilute disinfectant until clean.
- Ensure all surfaces are rinsed with clean water and dried thoroughly after disinfecting.
- Do not use solvents, bleaches, abrasives, synthetic detergents, wax polishes or aerosols.
- Refer to the user manual for the cleaning of speciality controls.
- Disinfected products should be placed in or covered with a non-permeable plastic bag or its original packaging and labelled as disinfected to maintain disinfection and cleanliness whilst being transported or stored.
- Where available, please attach a copy of your Disinfection Certificate to the product.